NovaStar · Brompton · Colorlight

LED wall data port calculator

A 1G Ethernet port carries about 650,000 pixels at 8-bit, 60 Hz on NovaStar and Colorlight: 655,360 on classic NovaStar senders such as the MCTRL4K and on Colorlight, 659,722 on NovaStar COEX. Brompton's 1G outputs carry less: 525,000. Panels per port = port pixels ÷ pixels per panel, rounded down; ports = panels ÷ panels per port, rounded up. Bit depth and frame rate change it, so pick them below.

Ports needed

9

at least

Panels per port

14

36,864 px per panel

Pixels per port

527,777

659,722 at 100 % · 100 % of the 8-bit rating

Units

1

20 ports, 9,000,000 px max each

The formula

Port pixels = rated pixels (8-bit, 60 Hz) × 60 ÷ frame rate × bit-depth share × load
Panels per port = port pixels ÷ (panel width × panel height), rounded down
Ports = panels ÷ panels per port, rounded up
Units = the larger of ports ÷ ports per unit and total pixels ÷ the unit's max load

The port count is the minimum. LED Planner's Data page cables each port as one run along your data path, around cutouts, which can take more, and draws the map the crew cables from.

Worked example

The 20 × 6 wall from the resolution calculator: 120 panels of 192 × 192 px on a NovaStar MX40 Pro (659,722 px per port at 8-bit, 60 Hz):

Panel = 192 × 192 = 36,864 px
100 % = 659,722 ÷ 36,864 → 17 panels per port → 8 ports
80 % = 527,777 ÷ 36,864 → 14 panels per port → 9 ports
10-bit = 263,888 px at 80 % → 7 panels per port → 18 ports

Port capacity by sender

Rated pixels per output port at 8-bit, 60 Hz, as LED Planner uses them, from the manufacturers' specs.

SenderBrandPortsPixels per portMax per unit
Tessera SX40Brompton4× 10G trunks → 4× XD → 40× 1G525,0009,000,000
Tessera S8Brompton8525,000—
MCTRL300NovaStar 1G1655,360—
VX4SNovaStar 1G4655,360—
MCTRL4KNovaStar 1G16655,360—
VX1000NovaStar 1G10650,000—
KU20NovaStar 1G6659,7223,900,000
MX20NovaStar 1G6659,7223,900,000
MX30NovaStar 1G10659,7226,500,000
MX40 ProNovaStar 1G20659,7229,000,000
CX40 ProNovaStar 5G6× 5G RJ45 + 1× 40G fiber2,592,0009,000,000
CX80 ProNovaStar 5G16× 5G RJ45 + 2× 40G fiber2,592,00035,389,440
MX2000 Pro · 1GNovaStar Modular2× 4×10G cards → 8× CVT10 → 80× 1G659,72235,380,000
MX2000 Pro · 5GNovaStar Modular2× 40G cards → 2× CVT8-5G → 16× 5G2,592,00035,380,000
MX6000 Pro · 1GNovaStar Modular8× 4×10G cards → 32× CVT10 → 320× 1G659,722141,000,000
MX6000 Pro · 5GNovaStar Modular8× 40G cards → 8× CVT8-5G → 64× 5G2,592,000141,000,000
X4Colorlight4655,360—
Z6 ProColorlight4× 10G fiber → 4× H10FN → 40× 1G655,3608,847,360

FAQ

How many pixels does one NovaStar port carry?

A 1G Ethernet port carries 655,360 pixels at 8-bit, 60 Hz on classic NovaStar senders such as the MCTRL4K (1,024 × 640). The COEX range (MX and KU series) is rated 659,722 per 1G port, and its 5G ports 2,592,000. Colorlight's 1G ports carry 655,360, like classic NovaStar; Brompton's 1G outputs carry less, 525,000.

How do I work out how many ports a wall needs?

Panels per port = port pixels ÷ pixels per panel, rounded down. Ports = panels ÷ panels per port, rounded up. Then cable each port's panels as one continuous run.

Why plan ports at 80 %?

A port loaded to 100 % has no room left: no spare panel, no reroute around a dead tile. Planning around 80 % keeps that slack. LED Planner offers 80 %, 100 % or your own figure.

What do 10-bit and higher frame rates do to port capacity?

Both cut it. Capacity scales with 60 ÷ frame rate, so 120 Hz halves it. On NovaStar 1G, 10-bit keeps 75 % with A10s Pro receiving cards and 50 % with others; 12-bit keeps 50 %. On NovaStar 5G, 10-bit keeps 80 % and 12-bit 67 %.

Why does Brompton count my small panels as bigger?

Brompton counts any panel side under 64 pixels as 64 when it loads a port, so a 20 × 80 px panel costs a port like 64 × 80. The calculator applies that automatically.

More free LED wall tools