Free · no signup
LED pixel map generator
A pixel map is an image at your wall's exact resolution that shows where every processor output, or slice, sits: its name, X and Y offset and size. LED Planner splits the wall into slices that fit each output, keeps them on panel edges and exports the map as a 1:1 PNG.
How it works
- 1
Set the canvas
Take the resolution from your wall's panel grid, or type any custom canvas, such as a media server output of 4608 × 1152.
- 2
Set the output size
The most one processor output carries: 1920×1080, 1920×1200, 2560×960, 2560×1600, 4K UHD, 4K DCI, or your own.
- 3
Split it
Auto-Split divides the canvas into slices that fit the output, snapped to whole panels. Or add slices by hand: drag them, resize from the corner, or type X, Y, W and H.
- 4
Export
Export Pixel Map PNG gives the full canvas with every slice's name, offset and size, a checkerboard, diagonals and a circle to check scaling, and overlapping slices flagged in red.
- 5
Or light it up in Millumin
Export for PGM Slices gives the free PGM Slices effects for Millumin, already set to your slices, to flash, chase, outline or frame each output.
Worked example
A wall of 40 × 10 panels of 192 px is 7,680 × 1,920 px. On 1,920 × 1,080 outputs, a slice can hold 10 panels across and 5 high, so Auto-Split makes 8 slices:
| Slice | X | Y | Width | Height |
|---|---|---|---|---|
| OUT 1 | 0 | 0 | 1,920 | 960 |
| OUT 2 | 1,920 | 0 | 1,920 | 960 |
| OUT 3 | 3,840 | 0 | 1,920 | 960 |
| OUT 4 | 5,760 | 0 | 1,920 | 960 |
| OUT 5 | 0 | 960 | 1,920 | 960 |
| OUT 6 | 1,920 | 960 | 1,920 | 960 |
| OUT 7 | 3,840 | 960 | 1,920 | 960 |
| OUT 8 | 5,760 | 960 | 1,920 | 960 |
Dial the same offsets into the processor and the media server's output mapping, and each output lands on its own panels.
FAQ
What is an LED pixel map?
An image at the wall's exact resolution that shows where each processor output, or slice, sits: its name, X and Y offset and size. The processor and the media server are set up from the same numbers, so the picture lands on the right panels.
When do I need slices?
When the wall is bigger than what one processor output, or one media server output, can carry. A 7,680 × 2,160 wall needs at least 8 outputs of 1,920 × 1,080.
Why keep slices panel-aligned?
So every slice edge lands on a panel edge. A seam through the middle of a panel is where any timing or scaling mismatch between two outputs shows; on a panel edge it hides. Auto-Split always snaps to whole panels.
Which media servers can use it?
Any: the PNG is 1:1 at the canvas size, so it loads as a still in Resolume, Millumin, Pixera, disguise or a switcher's multiviewer. For Millumin there's also Export for PGM Slices, free effects preset to your slices.