Free · no signup

LED wall resolution calculator

An LED wall's resolution is the panel's pixels times the panel count: pixels per panel wide × panels across, by pixels per panel high × panels high. Its physical size is those pixels × the pixel pitch. Type your panel and grid below for the resolution, size and aspect ratio.

Resolution

3,840 × 1,152 px

4,423,680 pixels

Width

9.98 m

32.8 ft

Height

3.00 m

9.8 ft

Aspect ratio

10:3

3.333 : 1

Diagonal

410″

10.42 m

Panels

120

36,864 px each

The formula

Width (px) = panel width (px) × panels across
Height (px) = panel height (px) × panels high
Width (m) = width (px) × pixel pitch (mm) ÷ 1000
Aspect = width (px) ÷ height (px), reduced

Worked example

A wall of 20 × 6 panels, each 192 × 192 px at 2.6 mm, a common 500 mm touring panel:

Width = 192 × 20 = 3,840 px
Height = 192 × 6 = 1,152 px
Pixels = 3,840 × 1,152 = 4,423,680
Size = 3,840 × 2.6 mm = 9.98 m wide, 1,152 × 2.6 mm = 3.00 m high
Aspect = 3,840 : 1,152 = 10:3

So the media server needs a 3,840 × 1,152 canvas for this wall, mapped pixel for pixel. That's more than one 1920 × 1080 output can carry, which is where a pixel map comes in.

Pixel pitch and viewing distance

A good rule of thumb: the closest comfortable viewer, in meters, is about twice the pitch in millimeters. It's a starting point, not a spec: cameras, content and brightness all move it.

Pixel pitchClosest viewerPixels per meter
1.5 mm≈ 3.0 m (10 ft)667
1.9 mm≈ 3.8 m (12 ft)526
2.6 mm≈ 5.2 m (17 ft)385
2.9 mm≈ 5.8 m (19 ft)345
3.9 mm≈ 7.8 m (26 ft)256
4.8 mm≈ 9.6 m (31 ft)208
5.9 mm≈ 11.8 m (39 ft)169
10 mm≈ 20.0 m (66 ft)100

FAQ

How do I calculate an LED wall's resolution?

Multiply the panel's pixels by the number of panels. Width in pixels = pixels per panel wide × panels across; height in pixels = pixels per panel high × panels high. A wall of 20 × 6 panels of 192 × 192 px is 3,840 × 1,152 px.

Why is my wall 9.98 m wide and not 10 m?

Pixel pitch is usually rounded. A 500 mm panel with 192 pixels is really 2.604 mm, sold as 2.6 mm, so pixels × pitch comes out a few millimeters short. For the exact physical size, multiply the cabinet size by the panel count; for the pixel canvas, the pixel count is exact.

How do I get a 16:9 LED wall?

With square panels, use panels across and high in a 16:9 ratio: 16 × 9 panels of 192 px make 3,072 × 1,728 px, exactly 16:9. Most stage walls aren't 16:9, so build the content at the wall's own resolution instead of scaling a 1920 × 1080 picture onto it.

Does my media server output need to match the wall resolution?

Map it pixel for pixel: send a canvas the size of the wall, or larger, and place the wall's area 1:1. Scaling softens text and lines. If the wall is bigger than one processor output, split it into slices with a pixel map.

What viewing distance does a pixel pitch need?

A good rule of thumb: the closest comfortable viewer, in meters, is about twice the pitch in millimeters. A 2.6 mm wall looks smooth from about 5.2 m (17 ft). Treat it as a starting point; cameras and content change it.

More free LED wall tools